Goofboard while waiting for wind

[Marty Lowe]

Something to work on while waiting for wind.

http://goofboard.com/

or make you own,,,

3/4 ply handi panel (2'x4')
3" abs or pvc pipe at 4'
1x2 furring strip
3 0r 4" x 15' grip tape

All of the above should be available at your local hardware store for under $40.

The board is approximately 48" long and 18" wide.
The 1x2 furring strips are placed on the bottom on either side. They act as stops for the
pipe, so board doesn't launch from under you.

You will need some basic carpentry tools and skills. Jigsaw will be required. Overall, an extremely easy project.